Home | Index | Pond | Search | Fountains | Contact | About | Help | Gallery | Garden | Shipping | Fax | Deals | View Cart
 

		Surface Sealants: White Mountain Stone Lacquer Hecht Neoprene Rubber Paint Sikaflex Urethane Sealant Polyurethane Gap Filler
Paint, Lacquer & Foam Sealant cannot be air shipped. No Overnight, 2nd or 3rd Day Air

See "Rock to Rubber" Adhesive Units for bonding rock to rubber liner

White Mountain Waterfall and Mortar Lacquer

We have used this lacquer based clear nontoxic sealer for over 10 years. We use it on finished waterfalls and border edge stone work to seal out the potential for concrete alkalai to affect the pH of the pond water. We recommend 6-8 coats on waterfalls and 4-5 coats on border edge rock work. Quick drying abilities allow for two coats to be applied on one day. 1 gallon covers 75 - 200 sq. ft. This product creates a long lasting clear glazed seal on rocks and mortar work and greatly aids in the maintenance process of your waterfall. Retards algae growth.
Products on this page marked with * are exceptions to free shipping.
HB410 White Mountain Waterfall & Mortar Lacquer: one gallon *	56.75	[Buy]
HB415 White Mountain Waterfall & Mortar Lacquer: five gallons *	289.00	[Buy]
Lacquer cannot be air shipped. No Overnight, 2nd or 3rd Day Air
White Mountain "Wet Look Lacquer" product information-package insert
Use laquer thinner for clean-up Apply product to cured concrete surface only Acid wash, using straight vinegar, rinse thoroughly and dry concrete before sealing.
[View Order]

Hecht Neoprene Black Rubber Paint:
If you have paint purchased prior to 11/2010 please see link: Hecht Paint Prior to 11/2010
	Herco (Hecht) Fish pond coating new formula instuctions - 4 Steps Step1: Proper surface preparation is very important to a successful application. Pond surface must be fully cured (as in new concrete, gunite, shot crete) clean, (free of surface dwelling algae, in the case of renovations) dry and free from any oil or grease. Remove all debris by brushing, sanding, sweeping, and/or power washing. Acid washing may be required in some cases. We use straight Heinz vinegar.
Step 2 Apply one coat of Herco (do not thin) PSC Primer to entire surface of your pond using a combination of chip brushes and medium mat roller (as you would use for latex painting). Allow primer coat to dry a minimum of 3 to 4 hours. Step 3 Apply 3 (important to apply 3 coats) consecutive coats of Herco coating. Drying time can vary depending on temperature, humidity and other environmental conditions. Allow a minimum of 3 to 4 hours between coats. Do not apply at temperatures below 50 degrees or if inclement weather is expected before coating is completely dry. Step 4 Allow the final coat of Herco coating to cure at least 5 days. Rinse (purge) the entire pond surface thoughly with fresh water and drain completely before filling with water.

Products on this page marked with * are exceptions to free shipping.
HH12 Hecht 12 ounce tube White Caulk	24.00	[Buy]
Hecht Neoprene Rubber Paint
5 Gallon Size
HH405    Hecht Neoprene Rubber Paint: 5 gallons *	660.00	[Buy]
1 Gallon Size
HH400    Hecht Neoprene Black Rubber Paint: per gallon *	125.00	[Buy]
HH401    Hecht Neoprene Gray Rubber Paint: per gallon.   *                Special Order, allow 2 - 3 extra days lead time	140.00	[Buy]
HH406    Hecht Primer: per gallon *	69.00	[Buy]
HH408    Hecht Thinner: per gallon *	89.00	[Buy]
1 Quart Size
HH410    Hecht Neoprene Black Rubber Paint: per quart *	49.00	[Buy]
HH416    Hecht Primer: per quart *	38.00	[Buy]
HH418    Hecht Thinner: per quart *	37.00	[Buy]
Paint cannot be air shipped No Overnight, 2nd or 3rd Day Air
Hecht Neoprene Paint - A User's Experience Why do you use black paint on a pond? Can you use another color?

S210

Silicone sealant, 3 oz. , black

7.95

[Buy]

Sikaflex - Think of this product as "silicone on steroids"!
Black	Sikaflex: Urethane sealant; 10.5 oz.	11.50
All other colors	Sikaflex: Urethane sealant; 10.5 oz.	13.50

S215	Gray	[Buy]		S216	Capitol Tan	[Buy]
S213	Colonial White	[Buy]		S217	Limestone	[Buy]
S214	White	[Buy]		S219	Medium Bronze	[Buy]
S218	Dark Bronze	[Buy]		S227	Stone	[Buy]
S212	Black	[Buy]
Colors as shown below may vary depending on your computer screen

	A fish-safe polyurethane foam used for filling gaps and spaces in pond border edge rock and waterfalls. Use in leiu of concrete mortar. One can yields 235 ft. of a 1/2" bead. Gap & space filler only. Not a sealant.
	FS100	Foam Filler 12 oz. pressurized can, black	13.00	[Buy]
	FS101	Foam Filler, 31 oz. pressurized can, black	32.00
Foam Filler cannot be air shipped. No Overnight, 2nd or 3rd Day Air

 

Top of Sealants Page